Free shipping on qualifying purchases of $99 or more. Exclusions apply.
Washington Alloy Co. Welding Wire Flux Cored .035 2lb Spool - E71T-GS Gasless
Washington Alloy Co. Welding Wire Flux Cored .035 2lb Spool - E71T-GS Gasless
In stock
SKU #
5340024
MFG #
.035 E71T-GS
$12.99
Does Not Ship To:
AK,CA,HI
OVERVIEW:
E71T-GS is self-shielding flux cored wire for single pass all-position welds on mild steels used for field construction, erection and repair. It is often used for fabrication of mild steel sheet metal where secondary shielding gas is not practical. E71T-GS is used to weld mild steels and it finds acceptance for use in fabrication and repair welds on thin mild steel and galvanized steel. E71T- GS is noted for its smooth, stable arc, full slag coverage, low spatter generation, ease of slag removal and excellent weld bead appearance. It has relatively light penetration and tolerates rust, dirt, and oil on the work piece. The weld deposit resembles that of E6011 Electrodes
Features
FEATURES:
- Washinton Alloy Co. E71T-GS Gasless Welding Flux Cored Wire .035 Diameter in a 2 lb Spool
Applications: E71T-GS is used extensively in maintenance for the fabrication, erection and repair of mild steel sheetmetal and is used in applications where secondary shield gas is not practical. The weld deposits are smooth and have light penetration helping to eliminate burn-throughs. The use of E71T-GS should be limited to non-structural applications only. E71T-GS is noted for its smooth arc and low spatter.
SPECIFICATIONS:
Typical Mechanical Properties of Weld Deposit
| Traverse Tension Test | 75,000 psi |
| Longitudinal Guided Bend Test | No Defects |
| % Elongation in 2" | 22% |
Typical Weld Metal Chemistry
| C | 0.16 |
| Mn | 0.82 |
| Si | 0.31 |
| Al | 1.3 |
| P | 0.014 |
| S | 0.005 |