Join us in-store for our Ladies Night Event Thursday, December 1st at 5pm!
PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 2oz. in Two Jars

PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 2oz. in Two Jars

In stock
SKU #
1490050
MFG #
020111
$4.99
* indicates a required field
PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 2oz. in Two Jars
$4.99
Does Not Ship To:
AK,CA,HI

PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High "wet grab" or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. In cold or cool temperatures, place PC-11 containers near heat prior to using. PC-11 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-11. Denatured alcohol is excellent for smoothing applied PC-11. Also use Denatured alcohol to clean surfaces before applying. Use with: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, and much more. Work time (70 degree F): 30-40 minutes. Tack free cure time: 90 minutes. Cure for service: 8-12 hours. Maximum cure: 7 day. Gardner impact resistance: 140in./lb. Conduction (electric): non conductive. Excellent thermal shock. Non toxic once cured. Heat range: -20 to 200 degree F.

Features

Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments
Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber
Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F
High-tack paste can be used in vertical and overhead applications
Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water
PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or makes changes.
High "wet grab" or tack of PC-11 Paste Epoxy makes overhead and sidewall work easy, without drip or sag.