Kidde Battery Operated Basic Carbon Monoxide Alarm

Kidde Battery Operated Basic Carbon Monoxide Alarm

In stock
SKU #
250315
MFG #
21025778
$24.99
Kidde Battery Operated Basic Carbon Monoxide Alarm
$24.99
Does Not Ship To:
CA,HI,AK
Calculate Estimated Shipping

The Kidde 9CO5-LP2 battery operated carbon monoxide alarm utilizes sophisticated electronic components to protect you and your family from the dangers of carbon monoxide.  This easy-to-install alarm is suitable for all living areas and has a 10-year life and a 10-year limited warranty.

  • 2 AA Battery Operated – Provides continuous protection even during power outages.
  • Event Memory – If the unit has detected CO concentrations of 100ppm or greater, the green LED will flash every 10 seconds.
  • Loud 85 Decibel Alarm – Alerts of deadly CO gas.
  • Test/Reset Button – Tests the alarm electronics and resets the unit during alarm.
  • UL Listed – Listed by UL as a Single Station Carbon Monoxide Alarm.
  • Event Memory - If the unit has detected CO concentrations of 100ppm or greater, the green LED will flash every 10 seconds.
  • Low Battery Hush - Silences low battery chirp warning for up to 12 hours to maintain protection without having to replace the batteries at an inconvenient time. 

SKU Notes

Brand

Kidde

Battery

2 AA
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
4.5
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
 
2.75
Depth (in)
For fixtures and ballasts, depth is the measurement of total distance from front to back of the product in inches.
 
1.5

Warranty

10 year limited
Power Source
Battery powered, hard-wared, or plugs into outlet.
 
Battery
Interconnected
Interconnects with other detectors so that if one goes off, all go off.
 
no
Humidity Range
The humidity range within which the detector will operate effectively.
 
10%-95% relative humidity (RH), non-condensing
Temperature Range
The temperature range within which the detector will effectively operate.
 
40˚F (4.4˚C) to 100˚F (37.8˚C)

Electrochemical CO sensor

Yes

More Information

More Information
Prop 65No