Hobart Handler® 140 MIG Welder, 500559

 FEATURES: 

• Self-resetting motor protection: Protects wire feed system from overload, you won't need to change or reset the circuit breaker.
• Arc Performance: Smooth, stable arc on all thicknesses allows you the best arc possible.
• Industrial cast aluminum wire drive system: Durable wire feed provides you professional performance.
• Five-position voltage control: Five voltage ranges allow you to fine-tune the arc.
• Quick Select drive roll: Less of your time consumed in setup by offering three grooves - two for different size solid wire and a third for flux-cored wire.
• Weighs only 57 pounds: Easier to transport: increased ability to weld where you need to weld.
• Convenient polarity changeover: Easier and quicker for you to change polarity between solid or tubular wire.
• Sloped control panel: Increased visibility so you can make adjustments more easily.
• Self- resetting thermal overload protection: Protects power transformer from thermal overload to provide you maximum reliability.

 INCLUDES:  

• Comfortable 10 ft. (3 m) HR-100 gun
• Owner's manual with installation, operation and maintenance guidelines.
• 10 ft. (3 m) work cable with clamp
• Built-in gas solenoid valve and dual-gauge regulator with gas hose
• Spool hub assembly accommodates 4 or 8 in. spools
• Sample spool of .030 in. (0.8mm) self-shielding flux-cored wire
• .030 in. (0.8mm) contact tips
• Quick Select™ drive roll for .024 in. (0.6mm) or .030/.035 in. (08/.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
• Power cord with plug
• Welding guide and material thickness gauge
  
  *NOT INCLUDED - Shielding gas and safety equipment not included.
  

 SPECIFICATIONS: