Free ground shipping on qualifying purchases of $99 or more. Exclusions apply.
Dayton 1TDR3 OEM Blower – Wheel Diameter 5 1/8 in
Dayton 1TDR3 OEM Blower – Wheel Diameter 5 1/8 in
In stock
SKU #
3320075
MFG #
1TDR3
$159.99
Free Shipping This product qualifies for free shipping.
Does Not Ship To:
AK,CA,HI
This DAYTON dynamically balanced blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Open motor has cast-aluminum end shields for greater heat dissipation, resulting in less downtime and longer service life. Ball bearings.
Note: Not for use with speed controllers.
Features
- Blower Outlet Shape: Rectangular
- With Flange: Yes
- Blower Wheel Diameter: 5 1/8 in
- Blower Wheel Width: 3 11/32 in
- Blower Voltage: 115V AC
- Blower Motor Type: Permanent Split Capacitor
- Blower Thermal Protection: Auto
- Blower Conduit Box: Yes
- CFM @ 0.000-In. SP: 273
- CFM @ 0.100-In. SP: 245
- CFM @ 0.200-In. SP: 230
- CFM @ 0.300-In. SP: 210
- CFM @ 0.400-In. SP: 183
- CFM @ 0.500-In. SP: 135
- Hz: 50/60
- Phase: 1
- Full Load Amps: 0.77
- RPM: 1640
- Bearing Type: Ball
- Motor Enclosure: Open
- Motor Insulation: Class B
- Lead Length: 13 in
- Max. Ambient Temp. : 104 Degrees F
- Max. Inlet Temp. : 104 Degrees F
- Inlet Dia. : 4 5/8 in
- Outlet Height: 3 5/8 in
- Outlet Width: 4 1/8 in
- Overall Height: 9 7/8 in
- Overall Width: 7 11/16 in
- Overall Depth: 8 7/8 in
- Wheel Type: Forward Curve
- Drive Type: Direct
- Mounting Position: All Position
- Housing Finish: Enamel
- Housing Material: Rolled Steel
- Housing Color: Gray
- Agency Compliance: CE and RoHS Compliance, cULus Recognized (E47479) for the Motor Only Not the Blower
- Replaces: 4C447
- Includes: Discharge Mounting Flange
- Dimension A: 8 7/8 in
- Dimension B: 10 7/16 in
- Dimension C: 7 11/16 in
- Dimension D: 4 1/4 in
- Dimension E: 9 7/8 in
- Dimension F: 3 5/16 in
- Dimension J: 5 1/2 in
- Dimension K: 5 in
- Dimension L: 4 7/8 in
- Dimension M: 4 3/8 in
This DAYTON dynamically balanced blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Open motor has cast-aluminum end shields for greater heat dissipation, resulting in less downtime and longer service life. Ball bearings.
Note: Not for use with speed controllers.
Features
- Blower Outlet Shape: Rectangular
- With Flange: Yes
- Blower Wheel Diameter: 5 1/8 in
- Blower Wheel Width: 3 11/32 in
- Blower Voltage: 115V AC
- Blower Motor Type: Permanent Split Capacitor
- Blower Thermal Protection: Auto
- Blower Conduit Box: Yes
- CFM @ 0.000-In. SP: 273
- CFM @ 0.100-In. SP: 245
- CFM @ 0.200-In. SP: 230
- CFM @ 0.300-In. SP: 210
- CFM @ 0.400-In. SP: 183
- CFM @ 0.500-In. SP: 135
- Hz: 50/60
- Phase: 1
- Full Load Amps: 0.77
- RPM: 1640
- Bearing Type: Ball
- Motor Enclosure: Open
- Motor Insulation: Class B
- Lead Length: 13 in
- Max. Ambient Temp. : 104 Degrees F
- Max. Inlet Temp. : 104 Degrees F
- Inlet Dia. : 4 5/8 in
- Outlet Height: 3 5/8 in
- Outlet Width: 4 1/8 in
- Overall Height: 9 7/8 in
- Overall Width: 7 11/16 in
- Overall Depth: 8 7/8 in
- Wheel Type: Forward Curve
- Drive Type: Direct
- Mounting Position: All Position
- Housing Finish: Enamel
- Housing Material: Rolled Steel
- Housing Color: Gray
- Agency Compliance: CE and RoHS Compliance, cULus Recognized (E47479) for the Motor Only Not the Blower
- Replaces: 4C447
- Includes: Discharge Mounting Flange
- Dimension A: 8 7/8 in
- Dimension B: 10 7/16 in
- Dimension C: 7 11/16 in
- Dimension D: 4 1/4 in
- Dimension E: 9 7/8 in
- Dimension F: 3 5/16 in
- Dimension J: 5 1/2 in
- Dimension K: 5 in
- Dimension L: 4 7/8 in
- Dimension M: 4 3/8 in