18x20 Water To Air Heat Exchanger, 1" Copper Ports W/ Easy Install Flange

OVERVIEW:

Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They are usually installed into the cold air side of the furnace if that is the best option. They work in much the same way as the central air conditioning unit.

These heat exchangers are to be hooked up to a boiler or a chilled water source. When hooked up to your boiler or chilled water source, these heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit.

Features

FEATURES:

Triple pass design
Include the flat front face mounting for easier installation and increased plenum strength.
Lifetime Manufacture Warranty
Works with chilled water
Works with MOST 3.5" coils
Made in the US

SPECIFICATIONS:

Outside Dimensions 18”(width)x23.5”(Length from Manifold to Base)x3.5”(Thickness)
This heat exchanger is ideal for a 18"x 21" plenum or larger.
The outlets come out on the 18" side
The fin area is 18"x 20"
GPM 15
CFM 1756
1" frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1" longer.
3 1/2" thick
Aluminum fins are installed at 12 fines per inch.
Tubing is 1/4" copper.
1" copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite's.