Tekton 1/4 Inch Drive 90-Tooth Dual-Direction Micrometer Torque Wrench (20-200 in-lb)
OVERVIEW:
Apply torque with confidence! Every feature was designed to instill confidence in the wrench's accuracy and control during operation.
- Calibrated to be accurate within ±3% for both clockwise and counterclockwise directions.
- Certified to the ISO standard for the full listed range (20 - 200 in-lb), unlike torque wrenches calibrated to ASME standards, which do not require calibration below 20% of the listed range.
- 90-tooth ratchet head with minimal swing arc (4º per tooth). Accurate micrometer scale with high-contrast markings.
- Locking collar for a positive hold on the target torque setting.
- Coarse handle knurling and centerline groove for a sure grip.
FEATURES:
- Accurate within ±3% for both directions
- Full-range calibration using the ISO standard, which has stricter standards compared to ASME
- Serialized certificate of calibration comes with every wrench
- 90-tooth fixed ratchet head ensures no skipping under stress
- 4-degree arc reduces length of travel
- Easy-to-read micrometer scale
- Spring-loaded collor locks in position to hold your setting and prevent accidental movement
- Coarse, deep, sharp-cut diamond pattern knurling for a secure grip
- Includes a full-featured case to provide safe transport and storage for the torque wrench
SPECIFICATIONS:
Micrometer Scales:
- Single-unit scale for simplicity (in-lb)
- High-contrast laser markings with bold fonts
- Satin finish on the body to reduce glare
- Numbers on the main scale are positioned close to the centerline to be readable without rotating the wrench
- Indicator lines on the main scale are straight, not offset
Proper Storage: To maintain calibration, store at the lowest setting to relax the adjustment spring
Drive Size: 1/4 inch
Tooth Count/ Swing Arc: 90-Tooth / 4º
Head Style: Fixed
Torque Range: 20 - 200 in-lb
Torque Calibration Test Points: 20, 120, 200 in-lb
Unit Scale: in-lb
Minimum Increment: 1 in-lb
Measuring Direction: Clockwise, Counterclockwise
Torque Accuracy: Within ±3% CW/CCW
Feedback: Mechanical Click
Standards (meets or exceeds): ISO 6789-1:2017 ASME B107.300-2021
Working Length: 7.7 - 8.4 in.
Overall Length: 10.1 in.
Item Weight: 0.73 lb.
Country of Origin: Taiwan
Includes:
- Case
- Product manual
- Certificate of calibration
- 1/4 inch drive hex bit holder
- 1/4 to 3/8 inch drive adapter
This is a carousel with product cards. Use the previous and next buttons to navigate.
