Free shipping on qualifying purchases of $99 or more. Exclusions apply.
Loctite®PL300®VOC Foamboard Adhesive
In stock
Only %1 left
SKU #
100000000004494
As low as $2.99
Does Not Ship To:
HI,AK
Loctite®PL300®VOC Foamboard Adhesive
PL 300 Low VOC Foamboard Adhesive is a premium grade formulation for bonding foamboard insulation to a variety of surfaces, interior or exterior. It is compatible with all other foamboard insulation products. PL 300 VOC is a latex-based adhesive especially designed for bonding polystyrene foam to itself or to a variety of construction materials, including, but not limited to: wood, gypsum board, concrete and brick. Low VOC formulation meets stringent State and Federal VOC Regulations.
Recommended For:
Bonding to all types of surfaces: wood, fiberglass panels, concrete, brick and drywall; it permanently joins foamboard to the substrate without compromising the insulation value of the foam
Not Recommended For:
Do not apply at temperatures lower than 40°F (5°C) or above 100°F (38°C)
Not to be used in areas subject to permanent water immersion
Do not use on polyethylene (PE), polypropylene (PP), polytetrafluoroethylene (PTFE) and acrylic
Should not be applied outside if rain is expected within 12 hours
PL 300 Low VOC Foamboard Adhesive is a premium grade formulation for bonding foamboard insulation to a variety of surfaces, interior or exterior. It is compatible with all other foamboard insulation products. PL 300 VOC is a latex-based adhesive especially designed for bonding polystyrene foam to itself or to a variety of construction materials, including, but not limited to: wood, gypsum board, concrete and brick. Low VOC formulation meets stringent State and Federal VOC Regulations.
Recommended For:
Bonding to all types of surfaces: wood, fiberglass panels, concrete, brick and drywall; it permanently joins foamboard to the substrate without compromising the insulation value of the foam
Not Recommended For:
Do not apply at temperatures lower than 40°F (5°C) or above 100°F (38°C)
Not to be used in areas subject to permanent water immersion
Do not use on polyethylene (PE), polypropylene (PP), polytetrafluoroethylene (PTFE) and acrylic
Should not be applied outside if rain is expected within 12 hours