Use promocode SAVE10 to save $10 off your purchase of $100 or more going on 4/24/23-4/28/23!
•For best results, clean and dry all surfaces with a residue-free solvent, such as
Permatex® Brake and Parts Cleaner.
•Cut nozzle to desired bead size gaskets are best formed using a 1/16" to 1/4" (2 to 6 mm) bead.
•Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts
immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry
for one hour then retighten 1/4 to 1/2 turn.
•Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions.
•Replace cap after use. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with
non-flammable cleaning fluid.