Use promocode SAVE10 to save $10 off your purchase of $100 or more going on 4/24/23-4/28/23!
Hobart 500574 IronMan 240 MIG Welder

Hobart 500574 IronMan 240 MIG Welder

In stock
Hobart 500574 IronMan 240 MIG Welder
Free Shipping This product qualifies for free shipping.
Does Not Ship To:
This item ships directly from the manufacturer and may require additional processing time.

A powerful, heavy-duty wire feed welder that delivers professional results with superior arc quality. Runs on 240V input power, welds up to 1/2 in. mild steel, and is spool gun ready for aluminum.

  • 200 amps @ 60% duty cycle, and wide amperage range - Increases your productivity by offering longer welding periods with high machine output duty cycles. Versatile for MIG and flux-cored, gas or gasless welding applications. Allows you to weld at higher amps at a lower duty cycle.
  • Arc Performance - Smooth, stable arc on all thicknesses with up to 280 amps of output.
  • Run-in Technology - Experience smooth, spatter-free starts with the IronMan 240. The run-in feature automatically slows the wire feed speed to a pre-set speed prior to arc initiation, improving arc starts.
  • Infinite voltage and wire speed control - Maximizes your amount of control by simplifying and making accurate adjustments. Allows you to control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up.
  • Spool gun ready - Easy for you to setup for welding aluminum with the SpoolRunner 200 with no additional interface.
  • Reversible drive rolls: two grooves for two wire sizes on one drive roll - Decreases your amount of spare parts, changeover time, and overall costs. 50% less stocking, one-piece drive roll.
  • Hinged feeder panel - Increases your productivity and is more appealing. Gives you more access to wire feeder panel for spool and feed roll changes.
  • Fan-on-Demandâ„¢ - Reduces your power consumption and containments by automatically running the cooling system when needed.


  • 15 ft. 200-amp MIG Welding gun
  • Weld, set-up and parts information chart
  • Regulator/flow gauge
  • 5 ft. gas hose
  • Primary input cable with plug
  • Dual-groove drive roll - .030/.035 in.
  • 10 ft. work cable with clamp
  • .030 and .035 contact tips
  • Built-in running gear/cylinder rack


  • Shielding gas
  • Safety Equipment

Material Thickness

Mild Steel 24 GA. (0.8 mm) - 1/2 in.

Weldable Metals

Stainless Steel

Input Voltage

220/230/240 V

Input Phase


Current Type


Rated Output

60% @ 200A

Max Open Circuit Voltage

40 VDC

Amperage Range

30 A - 280 A

Wire Feed Speed

50 IPM 700 IPM


Running Gear / Cart (Standard)

Weld Output


Net Width

19 in

Net Height

30 in

Net Length

40 in

Net Weight

186 lbs


3 Years