Drolet HT3000 High Efficiency Wood Stove
You want to change your old appliance to acquire a new one? Get the ultimate heating beast with 110,000 BTU/h heat output and a ridiculously low emission rate of just 1.32 g/h. In an improved version, the HT-3000 succeeds to the HT-2000 and is the perfect wood burning stove for the ultimate experience in terms of safety, durability and reliability!
A blower, a thermodisc, a fire screen and a fresh air intake kit are also available for greater efficiency.
|Fuel type||Dry cordwood|
|Recommended heating area-ft² ()||1,000 - 2,700|
|Overall firebox volume||3.5|
|EPA loading volume-ft³||2.84|
|Maximum burn time ()||10 h|
|Maximum heat output (dry cordwood) (3)||110,000 BTU/h (32.2 kW)|
|Overall heat output rate < (3) (4)||18,200 BTU/h (5.3 kW) to 49,500 BTU/h (14.5 kW)|
|Average overall efficiency (EPA cribs/Douglas fir) (4)||N.A. (HHV) (5)||N.A. (LHV) (6)|
|Average overall efficiency (dry cordwood) (4)||71 % (HHV) (5)||76 % (LHV) (6)|
|Optimum efficiency (7) (8)||77 %|
|Average particulate emissions rate (1)||1.32 g/h|
|Average CO (9)||92 g/h|
(1) This appliance is officially tested and certified by an independent agency.
(2) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
() Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
(3) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(4) As measured per CSA B415.1-10 stack loss method.
(5) Higher Heating Value of the fuel.
(6) Lower Heating Value of the fuel.
(7) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(8) Optimum overall efficiency at a specific burn rate (LHV).
(9) Carbon monoxyde.
|High-efficiency certified appliance||Yes, EPA 2020 approved|
|Maximum log length||22"|
|Log positioning||Over width|
|Flue outlet diameter||6"|
|Type of chimney||CAN/ULC S629, UL 103 HT (2100 °F)|
|Minimum chimney height (feet)||12'|
|Baffle type||High quality vermiculite|
|Approved for an alcove installation||Yes|
|Approved for a mobile home installation||Yes, with fresh air intake|
|Shipping Weight||520 lb (236 kg)|
|Door type||Single, glass with cast iron frame|
|Glass type||Ceramic glass|
|Glass surface – dimensions (Width X Height)||18 3/8" x 12 1/8"|
|Glass air-wash system||Yes|
|Overall dimension (Height)||36 3/8''|
|Overall dimension (Width)||28 1/8''|
|Overall dimension (Depth)||31 1/4''|
|Door opening – dimension (Height)||10 5/8"|
|Door opening - dimension (Width)||19"|
|Firebox – dimension (Height)||12 7/8"|
|Firebox – dimension (Width)||22 7/8"|
|Firebox – dimension (Depth)||20 1/8"|
|Firebox lined with refractory bricks for better heat distribution||Yes|
|Stainless-steel secondary-air system improving gas combustion||Yes|
|Steel thickness – body||3/16"|
|Steel thickness – top||5/16"|
|USA standard (emissions)||EPA|
|Canadian Standard (emissions)||CSA B415.1-10|
|USA standard (safety)||UL 1482, UL 737|
|Canadian standard (safety)||ULC S627|
|Tested and listed as per applicable standards||By an accredited laboratory (CAN/USA)|
|Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
|Single wall pipe||Double wall pipe||Single wall pipe||Double wall pipe|
|Clearance – back wall||13 1/4"||6"||13"||6"|
|Clearance - corner||7 1/4"||7"||7 1/4"||7"|
|Clearance – side wall||14"||14"||14"||14"|
|Clearance – top (measured from the platform on which the appliance is installed)**||84"||84"||84"||84"|
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.