Hobart Handler 130 Wire Welder with EZ-Mode

MFG #: 500568 SKU #: 62580652
Shipping Location: Vendor Shipped Calculate Shipping
  • image description

    Free Shipping

    This product qualifies for free shipping.

  • image description

    Shipping Couriers

    We offer different courier options.

  • image description

    Drop Shipped

    Shipping directly from the manufacturer.


Hobart Handler 130 Wire Welder with EZ-Mode

The Handler® 130 operates off 115-volt household current. Comes ready to weld without shielding gas using .030-.035 in (0.8-0.9 mm) flux cored wire. This welder includes the patented EZ-Mode™ feature which allows for simple single knob operation based on material thickness settings. The Handler 130 is equipped with a built-in gas valve, and with the addition of a regulator and gas hose, you're ready to MIG weld with .023-.030 in. (0.6-0.8 mm) solid wire. Use C-25 gas (75% argon/25% CO2) on 24 gauge - 1/8 in steel for a cleaner weld with less spatter. Use Tri-Mix gas and stainless wire for welding on 16-12 gauge stainless steel.

•EZ-Mode™ feature means operator only needs to adjust a single knob for the thickness of mild steel when welding with self-shielded flux-cored wire. Single knob automatically adjusts both the volts and wire feed speed when unit is set in EZ-Mode™
•Built-in gas valve makes unit MIG-ready for solid wire welding applications
•Welds 24 gauge up to 3/16 inch steel with flux cored wire
•Proven built-in wire feeder with quick-release drive roll tension lever
•Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding.
•Four output voltage settings with wire feed speed tracking provide quick and easy adjustment for different materials and thickness.
•Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6mm) and .030 - .035 in. (0.6 - 0.9 mm) wire
•Self-resetting thermal overload and motor protection

Comes complete with:
•Comfortable 8 ft. (2.4 m) H-9B gun with liner for .023-.035 in (0.6-0.9 mm) wire
•.030 in. (0.9 mm) contact tips
•8 ft. (2.4 m) work cable with clamp
•Sample spool of .030 in. (0.9 mm) self-shielded flux cored wire
•Spool shaft to accommodate 4 in spools (Optional hub kit available for 8 in spools)
•Power cord with plug
•Weld set-up and parts information chart

•1 Phase

•Flux Cored [FCAW]

Material Thickness:
•Welds 24 gauge up to 3/16”

Skill Level:

•Light Maintenance and Repair
•Light Fabrication